Media for grinding and mixing
 |
Y-TZP: The TZP medias are made with excellent super fine zirconia powders, granulated by spray drying, moulded by bag isostatic pressing and sintered at high temperature.High density, High toughness, High strength, Non-porous, Chip-resistant surface, and Super chemical stability.High grinding efficiency, Preventing material from contamination, High wear-resistance, Suitable for high viscosity.Applicable occasion: Ceramics, Electronics, Cosmetics, Medicines, Foodstuffs, Coatings, Top grade paints, Magnetic materials, Special materials etc.
Size: ★Balls:Φ0.3~0.5, Φ0.6~1.0, Φ1.0~1.5, Φ2, Φ3,Φ5, Φ6.5, Φ10, Φ15mm，Φ20, Φ25, Φ30, Φ35~60mm
★Cylinders:Φ6.35×6.35, Φ9.53×9.53, Φ12.7×12.7, Φ19.1×19.1mm，Φ25.4×25.4mm
Al2O3: The Al2O3 medias are made with super fine alumina powders, moulded by bag isostatic pressing and sintered at high temperature.
High hardness, Non-conductive, Non-magnetic, Super insulatibity and Low price
Applicable occasion: Ceramics, Building materials, Chemicals, Cements, Paints, Nonmetallies, Mechanical polishing
Size: ★Balls:Φ1, Φ2, Φ3,Φ5, Φ6.5, Φ10, Φ15, Φ20, Φ25, Φ30, Φ35mm，Φ40, Φ50, Φ60, Φ70mm
★Cylinders:Φ12.7×12.7, Φ19.1×19.1, Φ25.4×25.4, Φ38×38, Φ50×50 mm，Φ60×60, Φ70×70mm
ZrSiO4: The ZrSiO4 beads are produced by fusion processing, It is widely used in grinding of coatings, inks, dyestuffs, pesticides, cosmetics, titanium dioxide, magnetic materials, kaolin, calcium carbonate, fillings, etc. Also applicable in surface treatment in mold, mechanical and turbo system, such as cleaning, polishing and burring, etc.
Size: ★Beads:Φ0.2~0.6, Φ0.6~1.0, Φ0.8~1.25, Φ1.0~1.6, Φ1.6~2.5mm
Ceramic Medias Selection
Following conditions shall be taken into account in selection:
●Types of adopting milling equipment. Including ball, attrition, sand and jar mills etc.
●Property of material, including density, hardness, viscosity, strength, etc.
●Diameter and purity of material , and desired diameter and purity of finished products
〖The comparing table of the familiar medias......〗
 |